Iranian Journal of Materials Science and Engineering

---

Abstract: The application of inexpensive materials such as copper, zinc, lead, iron and steel slag in manufacturing of glass and glass-ceramic products in construction industry, lining materials as anti-corrosion and anti-abrasion coatings in metals and etc, has led to considerable progress in glass technology in recent years. The composition of slag glass-ceramics is mainly located in the SiO2-Al2O3-CaO-MgO system, in which one of the most important problems is the lack of bulk crystallization. To resolve the above-mentioned problem, the crystallization behavior of various compositions containing different nucleating agents Cr2O3 , Fe2O3 and TiO2 in the single, double and triple forms were studied by differential thermal analysis (DTA).The precipitated crystalline phases was determined by the X-ray diffractometry and the micro-structural analysis was studies using the SEM micrographs. The three point bending strength, micro-hardness and the chemical resistance of the best composition were determined. According to the results, the resulted glassceramic had a better specification than the stoneware floor tiles and the porcelain one, which are considered as the two important competitors for it.

---

Abstract: In the present work, effect of the nucleating agent such as TiO2, ZrO2, P2O5, Ye2O3 and CeO2 in single, double, triple and fourth systems on the crystallization behavior of various compositions was studied. Using differential thermal analysis (DTA), the composition of Li2O-Al2O3-SiO2 (LAS) was optimized and the coefficient of thermal expansion (CTE), three point flexural strength, hardness, thermal shock resistance, and chemical resistance of the most favorable composition were evaluated. The crystalline phase was determined by the x-ray diffractometry. Moreover, the micro-structure of the samples was studied by SEM technique. According to the results, -Eucryptites (high quartz solid solution) was the main crystalline phase and the CTE values of the optimized sample were determined as 1.65-1.93 10-6 in the temperature range of 20-500 oC. Furthermore, three point bending strength ranged from 139 to 155 MPa.

---

The effect of Y2O3, CeO2, P2O5, ZrO2 and TiO2 in single, double and triple form on crystallization mechanism of Li2OAl2O3- SiO2(LAS) glass-ceramic system was investigated .The nucleation and crystallization peak temperatures of optimized samples in each group were determined by Ray & Day method .The crystalline phase was determined by the X-ray diffractometery .The micro-structure of the samples was studied by SEM techniqe .Crystallization activation energy ,E, and kinetic constants(n ,m) were determined by differential thermal analysis (DTA) through Marotta and Augis-Bennet methods .According to the results ,the Avrami constants(m ,n) derived from the Marotta and Augis- Bennett, glasses containing both ZrO2 and TiO2 nuclei were showed bulk crystallization .The crystallization mechanism of specimens containing ZrO2, TiO2 and CeO2 in the triple nuclei series represent two-dimensional bulk crystallization .By comparison of Avrami constants and activation energy of crystallization of optimized samples with other results they gave much lower value of E(255.5 kJ/mol) and higher value of n in 4.38.The lattice constants of the main phase( -eucryptite solid solution)in samples were determined according to the XRD results

---

In the present study, the feasibility of α-Fe ferromagnetic phase formation in glass and glass-ceramic by reduction in hydrogen atmosphere have been investigated. The glass with the composition of 35Na 2 O–24Fe2O3–20B 2O3 – 20SiO 2 –1ZnO (mol %) was melted and quenched by using a twin roller technique. As quenched glass flakes were heat treated in the range of 400-675 °C for 1-2 h in hydrogen atmosphere, which resulted in reduction of iron cations to α-Fe and FeO. The reduction of iron cations in glass was not completely occurred. Saturation magnetization of these samples was 8-37 emu g -1 . For the formation of glass ceramic, As quenched glass flakes heat treated at 590 °C for 1 h. Heat treatment of glass ceramic containing magnetite at 675°C in hydrogen atmosphere for 1 h led to reduction of almost all of the iron cations to α-Fe. Saturation magnetization of this sample increased from 19.8 emu g -1 for glass ceramic to 67 emu g -1

---

ZrO₂ is commonly incorporated into ceramic glass substrates to enhance radiopacity, mechanical strength, and chemical durability. Experience has shown that the crystallization of tetragonal zirconia in glass will have a greater effect on the mechanical properties of ceramic glass. To achieve optimal properties in zirconia, stabilizing oxides are often added to enhance its structural and mechanical qualities. In this research, in order to stabilize the tetragonal phase of zirconia, MgO and CeO₂ were added to the glass ceramic composition of the Li₂O-SiO₂-ZrO₂ system and the desired dental substrate was synthesized through the sinter process. The behavior of sintering and crystallization of basic and optimized glass was investigated using HSM and DTA thermal analysis, respectively. The results showed that the optimal sinter temperature, heat press and heat treatment are equal to 730°C, 900°C and 825°C, respectively. Then, in order to determine the crystallization behavior of the prepared samples, X-ray diffraction and microstructure images were used. The results also showed that the presence of the main Li₂ZrSi₆O₁₅ phase crystallizes at a temperature of 825°C in the base sample and the sample containing ceria. Also, due to early formation of MgSiO₃ crystals, magnesia prevents sintering and formation of Li₂ZrSi₆O₁₅ phase and stability of tetragonal zirconia phase. In the sample containing ceria, during crystallization, ZrO₂ entered its crystal structure and led to the stability of the tetragonal zirconia phase at room temperature.