THE EFFECT OFCARBON NANOTUBES ON THE SINTERING BEHAVIOR OF ZIRCONIA BASED MATERIALS

Zahedi, A. M.; Rezaie, H. R.; Javadpour, J.

doi:10.22068/ijmse.12.4.1

Volume 12, Issue 4 (December 2015) IJMSE 2015, 12(4): 1-8 | Back to browse issues page

‎ 10.22068/ijmse.12.4.1

Mendeley

Zotero

RefWorks

Zahedi A M, Rezaie H R, Javadpour J. THE EFFECT OFCARBON NANOTUBES ON THE SINTERING BEHAVIOR OF ZIRCONIA BASED MATERIALS. IJMSE 2015; 12 (4) :1-8
URL: http://ijmse.iust.ac.ir/article-1-808-en.html

THE EFFECT OFCARBON NANOTUBES ON THE SINTERING BEHAVIOR OF ZIRCONIA BASED MATERIALS

A. M. Zahedi

, H. R. Rezaie

, J. Javadpour

Abstract: (21272 Views)

Different volume fractions (1.3, 2.6, and 7.6 Vol.%) of carbon nanotubes (CNTs) were dispersed within 8Y-TZP nanopowders. Mixed powder specimens were subsequently processed by spark plasma sintering (SPS) and effects of CNTs on the sintering process of 8Y-TZP/CNT composites was studied. Maintenance of CNTs through the SPS process was confirmed using TEM and Raman Spectroscopy. Studies on the sintering profile of zirconia-CNT composites (Z-xC composites) could, to some extent, clarify the effect of CNTs’ volume fraction on the densification rates of Z-xC composites. The specimen with the highest content of CNT (Z-7.6C) showed the lowest sintering rate while it was unable to reach full density.

AWT IMAGE