Prasanna U, Kambila V K, Nadella K J. Effect of Fe2O3 Nano Filler on Structural and Electrical Properties of PVB-NaNO3 Complexed Solid Polymer Electrolytes for Electrochemical Cell Applications. IJMSE 2024; 21 (4) :1-10
URL:
http://ijmse.iust.ac.ir/article-1-3650-en.html
Abstract: (3915 Views)
The composite solid polymer electrolyte films were prepared by doping nano-sized Fe2O3 particles on PVB (Polyvinyl Butyral) complexed with NaNO3 salt by solution casting technique. FTIR, XRD, and SEM methods characterized these electrolyte films. The Fourier Transform Infrared Spectroscopy and X-ray diffraction methods reveal the structural and complexation changes occurring in the electrolytes. The surface morphology of the electrolyte film was examined using the SEM (Scanning Electron Microscope) technique. The PVB+NaNO3+Fe2O3(70:30:3%) electrolyte shows a moderate ionic conductivity of 2.51×10−5 S cm−1 at ambient temperature (303 K). AC impedance spectroscopic analysis evaluates the ionic conductivity of the produced polymer electrolyte. Wagner's polarisation technique was applied to study the charge transport characteristics in the electrolyte films. The investigation revealed that ions constituted the majority of the transport carriers. An Open Circuit Voltage (OCV) of 2.0V and a Short Circuit Current (SCC) of 0.8 mA were found in the discharge characteristics data for the cell constructed with the polymer electrolyte sample.
Full-Text [PDF 917 kb]
(1031 Downloads)
- The solid polymer electrolyte films for Pure PVB and 70PVB+30NaNO3+wt%Fe2O3 were prepared using a solution casting technique.
- XRD, FTIR, and SEM are used for amorphousness, complex formation, and surface morphology studies of polymer electrolytes.
- PVB+NaNO3+Fe2O3 (70:30:3%) film exhibits the highest conductivity (2.51×10−5 S cm-1).
- Wagner’s polarization technique, can be employed to measure the ionic and electronic transport numbers of all prepared samples.
- The Open Circuit Voltage (OCV) of 2.0V and a Short Circuit Current (SCC) of 0.8 mA were found in the discharge characteristics data for the cell constructed with the polymer electrolyte sample.
Type of Study:
Research Paper |
Subject:
Polymers