Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel

Sohrabi, Mohammad Javad; Mirzadeh, Hamed; Sadeghpour, Saeed; Mahmudi, Reza

doi:10.22068/ijmse.3335

Volume 20, Issue 4 (December 2023) IJMSE 2023, 20(4): 1-9 | Back to browse issues page

‎ 10.22068/ijmse.3335

Mendeley

Zotero

RefWorks

Sohrabi M J, Mirzadeh H, Sadeghpour S, Mahmudi R. Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel. IJMSE 2023; 20 (4) :1-9
URL: http://ijmse.iust.ac.ir/article-1-3335-en.html

Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel

Mohammad Javad Sohrabi

, Hamed Mirzadeh

, Saeed Sadeghpour

, Reza Mahmudi

Abstract: (7251 Views)

Deformation-induced α΄-martensite generally forms at shear bands in the coarse-grained austenite, while it nucleates at grain boundaries in the ultrafine-grained (UFG) austenite. The available kinetics models are related to the nucleation on the shear band intersections, and hence, their application to investigating the kinetics of α΄-martensite formation for the UFG regime cannot be justified. Accordingly, in the present work, the general Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) model was implemented for comparing the kinetics of α΄-martensite formation in the UFG and coarse-grained regimes using an AISI 304L stainless steel. On the experimental front, the X-ray diffraction (XRD) patterns and the electron backscattered diffraction (EBSD) maps were used for phase and microstructural analyses, respectively. It was revealed that the simple JMAK-type model, by considering the dependency of the volume fraction of α΄-martensite on the strain, is useful for modeling the experimental data, predicting the nucleation sites based on the theoretical Avrami exponents, and characterizing the transformation kinetics at low and high strains.

Keywords: Metastable austenitic stainless steels, Grain size, Transformation-induced plasticity, Kinetics of phase transformations, Johnson–Mehl–Avrami–Kolmogorov model