Volume 6, Issue 3 (Summer 2009 2009)                   IJMSE 2009, 6(3): 7-14 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
M. Goodarzi, S. M. A. Boutorabi, M. A. Safarkhanian. EFFECTOFROTATIONALSPEED (Ù) ON THE PARTICLES BREAK UPAND HARDNESS VALUES IN 2024-T851 FRICTION STIR WELDS. IJMSE 2009; 6 (3) :7-14
URL: http://ijmse.iust.ac.ir/article-1-196-en.html
EFFECTOFROTATIONALSPEED (Ù) ON THE PARTICLES BREAK UPAND HARDNESS VALUES IN 2024-T851 FRICTION STIR WELDS
M. Goodarzi , S. M. A. Boutorabi , M. A. Safarkhanian
Abstract:   (41786 Views)
Abstract:In this study, an effort has been made to determine the influence of rotational speed of tool on themicrostructure and hardness values of friction stir welded 2024-T851 aluminum alloy. The microstructure of stir zonein the joints has been investigated. It was found that the particles such as Al6(CuFeMn) particles are broken up duringfriction stir welding, and the degree of break up of these particles in the stir zone increases with increasing rotationalspeed. Since the break up of these particles and the recrystallization of new grains happen simultaneously, the brokenparticles would be placed in the grain boundaries. Moreover, the hardness value in the stir zone increases withincreasing rotational speed
Keywords: Friction stir welding, Aluminum alloys, Microstructure, Particles, Hardness
     
Type of Study: Research Paper | Subject: Ceramics
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb